Jeepininin
https://bbb.jeepininin.com:443/

ford 9" setup
https://bbb.jeepininin.com:443/viewtopic.php?f=15&t=25764
Page 1 of 1

Author:  xj-sparky [ Tue Oct 18, 2011 4:36 pm ]
Post subject:  ford 9" setup

i had someone install new gears and a locker in my 9" when i built it and have recently started getting a howl from it when driving it and decelerating/ removing load. wondering if someone is experienced in setting them up that could take a look at it if i yank it out. it has an auburn locker with 4.88 gears

Author:  SUBARU? [ Tue Oct 18, 2011 6:18 pm ]
Post subject:  Re: ford 9" setup

Just curios to see if you've changed you fluid latley? I have seen that actually cause it.

If it's not a bearing issue it's a backlash, or pinion depth issue. I would just be prepared to replace the gears and a master install kit.

It may be an easy fix but the gears/bearings may have already been damaged.

Tuff at Get bent Kustoms does rear end setup.... Pm him or call him.

Author:  Alpine [ Tue Oct 18, 2011 6:46 pm ]
Post subject:  Re: ford 9" setup

Here's his website: http://www.getbentkustoms.com/

It's got all of his contact info on it.

Author:  xj-sparky [ Tue Oct 18, 2011 10:17 pm ]
Post subject:  Re: ford 9" setup

I'll check the fluid and give "get bent" a call. Thanks for the replies

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/